Khan Associates is the authorized Bluwat distributor in Pakistan, supplying genuine Bluwat water and wastewater treatment chemicals to industries nationwide. Bluwat (Yixing Bluwat Chemicals Co., Ltd.) has manufactured coagulants and flocculants in Jiangsu, China since 2000, operating three production bases and serving more than 5,000 industrial users across 100+ countries.
For Pakistani industry, Bluwat chemistry addresses the treatment challenges that matter most locally: color removal from textile dyeing effluent, sludge dewatering at effluent treatment plants, and coagulation for both municipal and industrial water, all supported by Khan Associates technical teams in Lahore and Karachi.
Khan Associates holds authorized distribution rights for Bluwat in Pakistan. Every product we supply is imported directly from Bluwat production facilities, arrives with a Certificate of Analysis (COA) for each batch, and is backed by application support from our technical team. When you source Bluwat through Khan Associates, you receive consistent, genuine chemistry with verified specifications, lot after lot.
Our Bluwat range covers the complete coagulation and flocculation workflow for water and wastewater treatment. All product lines below are available in Pakistan with technical dosing support and jar testing assistance.
Bluwat’s flagship BWD-01 water decoloring agent removes color from textile dyeing and printing wastewater, one of the most persistent treatment challenges for Pakistani processing units. It targets reactive, acid and disperse dye effluent, helping dyeing houses meet NEQS discharge limits for color and COD before releasing treated water.
Anionic, cationic and nonionic polyacrylamide grades for sludge dewatering, solid-liquid separation and raw water clarification. Cationic PAM performs in belt press and decanter sludge dewatering at effluent treatment plants, while anionic grades serve mineral processing, coal washing and industrial clarification duties.
Spray-dried Polyaluminium Chloride (PAC) with Al2O3 content above 30 percent, Aluminum Chlorohydrate (ACH) and Ferric Sulphate for drinking water treatment, industrial effluent coagulation and high-turbidity water clarification at municipal and industrial plants.
Cationic polymer coagulants for paper mills, oil-water separation and dye fixing, alongside PHPA drilling additives for oil and gas operations, defoamers and demulsifiers. These specialty grades complete the treatment program where a single coagulant cannot deliver the target water quality alone.
Textile Dyeing and Printing Units: BWD-01 decoloring agent and PolyDADMAC programs for color and COD removal, supporting NEQS discharge compliance under Punjab EPD and Sindh EPA enforcement at dyeing houses and processing mills.
Tanneries: Coagulation and flocculation chemistry for high-load tannery effluent, including chrome-bearing streams requiring staged treatment.
Paper and Pulp Mills: Retention aids, PolyDADMAC and PAM programs that improve fiber recovery and reduce COD in final discharge.
Sugar Mills: Flocculants for juice clarification support and effluent treatment during crushing season, when hydraulic and organic loads peak.
Municipal and Drinking Water Plants: Spray-dried PAC and ACH coagulants for turbidity removal and clarification in potable water treatment.
Oil and Gas Operations: PHPA polyacrylamide drilling fluid additives and produced-water treatment polymers for drilling and recovery programs.
Industrial Effluent Treatment Plants: Complete coagulant-flocculant programs with jar testing to establish the right chemistry and dosage for each plant’s specific effluent profile.
Treatment chemistry only performs when the grade and dosage match your effluent. That is why our support begins before the first order: our team conducts jar tests on your actual samples, recommends the right Bluwat grade, and establishes dosing rates that hold up at plant scale. Consistent chemistry, verified by COA, delivered with technical backing.
Khan Associates is the Pakistan distributor for 12 international principals. Industrial clients building a complete chemical program also work with us for Nouryon Distributor in Pakistan, MT AquaPolymer Distributor in Pakistan and KOYE Chemical Distributor in Pakistan. You can view our complete portfolio on the international brands we represent in Pakistan page.
Yes. Khan Associates is the authorized Bluwat distributor in Pakistan, supplying genuine Bluwat coagulants and flocculants imported directly from Bluwat production facilities, with a Certificate of Analysis for every batch.
The complete range: BWD-01 water decoloring agent, anionic, cationic and nonionic polyacrylamide (PAM), Polyaluminium Chloride (PAC), Aluminum Chlorohydrate (ACH), PolyDADMAC, Polyamine, Ferric Sulphate and PHPA drilling additives.
Yes. BWD-01 is formulated for color removal from reactive, acid and disperse dye effluent, and is used by dyeing and printing units to bring discharge color and COD within NEQS limits.
Yes. Our technical team conducts jar tests on your effluent samples, recommends the right Bluwat grade and establishes optimized dosing rates before you commit to plant-scale supply.
Yes. We maintain local stock in standard industrial packaging, so supply continuity does not depend on import lead times for routine requirements.
Share your application, effluent type and current treatment setup, and our team will recommend the right Bluwat chemistry with a formal quotation, including jar testing where needed. Reach us by phone, WhatsApp or the inquiry form, and we will respond within one working day.
Khan Associates
Lahore Corporate Office: 184-S, Quaid-e-Azam Industrial Estate, Kot Lakhpat, Lahore, Pakistan. +92-42-35146680-83
Karachi Office: 908-909, 9th Floor, Portway Trade Centre, Plot 189/A, S.M.C.H.S, Main Shahrah-e-Faisal, Karachi, Pakistan. +92-21-34540251-52, khi@khanassociates.net
[WHATSAPP LINK] | [INQUIRY FORM SHORTCODE]